New Items

Product Details:

Non Edible Oil and fats are concentrated sources of energy. Vegetable oils contain Polyunsaturated Fatty Acids like linoleic and linolenic acids which are needed to meet the requirements. These are reputed for their nutritional value, purity and hygiene. We offer qualitative products available in customized packages, owing to which we are highly recommended in our client network.

Features:

• Natural taste
• Pure
• Longer shelf life

Product Details:

SR Polyamine is an organic compound having two or more primary amino groups Low-molecular-weight linear polyamines perform essential functions in oil well drilling. The drilling fluid is mainly composed of polyamine with strong inhibiting effect and MEG with the primary role of lubrication, lowering filtrate and inhibiting function. The drilling fluid has high lubricating property and strong inhibitory, and the performances of evaluation system approach the level of oil-based drilling fluid. Field application shows that polyamine imitation oil-based drilling fluid has the advantages such as stability performance, a wide range of density regulation, rheological easy to control, small amount of fluid loss and the thin cake, good toughness, effectively inhibiting shale hydration dispersed, and maintaining the borehole wall stable.

Product Details:

Generally, subterranean termites must maintain contact with soil to survive. However, there are occasions where native subterranean termites can live above ground in structures and be completely cut off from soil contact; although, this is not common. The probability that termites will attack a wooden structure after construction Termite attacks may even begin within a year after construction. Proper treatment of the soil with a liquid termiticide (insecticide formulated for termite control) before construction (pre-treatment) significantly reduces the threat from subterranean termites. If you know or suspect that your home is infested with termites, retain the services of a professional termite management of S.R. Chemical company. It is Suitable for use on all kinds of plywood, hardwood etc. Easy to apply to wood by spraying and injecting. Treated timber can be polished stained varnished painted. Give protection against wood Killer insects and wood rotting fungus. No powder falling problem arises in packed sheets of plywood, but as soon as furniture maker cuts the plywood, hardwood or waterproof ply for making furniture outside atmosphere and wind effect on any plywood. Killer crumbling your valuable furniture which is creating a yellow powder falling problem. Killer treatments to the soil are used to establish an insecticide barrier between the structure and the termite colonies in the soil. Existing concrete slab foundation houses normally require at least three types of treatment:

• Treatment under the concrete floor slab, including porches or patios abutting the house.
• Trenching and treating soil around the concrete slab perimeter outside of and adjacent to the house.
• Drilling and treating the void behind the rock or brick veneer.

The soil beneath the floor slab perimeter inside the footer or stem wall must be treated. Treatment also may be required along both sidesof interior support walls, next to interior partitions, and along all cracks and expansion joints in the slab, if termites are found in theselocations. Sometimes, it is necessary to treat the interior slab perimeter by drilling horizontally or at an angle through the exteriorfoundation walls. This method is often used to treat kitchens and bathrooms from outside the structure. Holes drilled in the slab should bespaced no further than 12 inches apart to achieve an effective, continuous barrier. The actual sub-slab treatment is accomplished byinjecting the termiticide through the concrete slab with a special hollow cylindrical rod inserted vertically through the previously drilledholes. Trenching of soil requires excavating a 6 inch to 8 inches wide by 6 inches to 8-inch deep trench adjacent to the outside foundation wall. Homes on pier and beam foundations are additionally trenched by excavating soil in an area 6 inches to 8 inches wide by 4 inches to 6inches deep around all piers and utility pipes beneath the home, and along inside and outside foundation walls. Trenching is labourintensiveand time consuming but provides a better, more continuous barrier than Roding alone. Make sure that all soil back-filled into thetrench is treated. When trenching is not possible, treatment to soilis sometimes done by injection with the hollow rod alone. The additionalsub-slab injection may be required on porches, patios, breezeways, driveways and entryways where separate concrete slabs exist.

Product Details:

SR-ACRO is a heavy duty terrace waterproof coating system, composed of specially developed highly elastic & resilient acrylic polymers, properly selected & graded fillers, lightfast & weather durable pigments, micro-fibres, additives & best quality fungicidal in the water medium. It is used as a liquid applied waterproofing membrane for all types of building terraces. It is a three-layer system with coats in different colours ensuring the proper build-up of the thickness, making it a reliable waterproofing system. The coating performance can be enhanced for large roofs, by providing a fibre mesh that is embedded or sandwiched between the coats.
Areas of Application:

• Building roofs / Terraces– Flat & sloping. 
• Over existing cementitious waterproofing treatments like brickbat coba, concrete screeds, acrylic coatings, etc.

Features & Benefits:

• Durability – Resistant to UV & weather conditions
• Strength - Higher tensile strength, tear resistance & bond strength with cementitious substrates
• Application advantage - No need to remove existing sound brickbat Coba, plaster, concrete surface
• Suitability - Can be used for flat as well as sloping roofs

Surface Preparation:

• Prepare the surface thoroughly by cleaning, washing and removing dust, dirt, oil, grease and loose particles.  In existing old terraces with brickbat Coba or screeds, the substrate must be checked for its soundness. Damaged or hollow portions, sharp edges, etc. must be cut and removed till the mother slab. The slab should be recoated with the slurry of SR-SBR LATEX and cement in 1:1 proportion. After drying, the brickbat coba in that portion should be reinstated by mixing Latex in the base slurry as well as while doing the top coba . Then pour SR-ACRO COAT 115 into these cracks and wait for it to dry. } Ensure that the roof slope of a minimum of 1 in 100, is already provided. Bitumen based waterproofing treatments if existing must be completely removed by mechanical scarification

Application:

• Apply the first coat of SR-ACRO COAT  115 without any dilution at the rate of 2 m2 per litre and allow it to dry before taking up the second and third coats, the rate of application being the same . Total thickness of 1 to 1.2 mm must be achieved when SR-ACRO COAT  115 is dry has an average thickness of 1 mm. This should be done in every 200 m2. over the entire roof. 

Product Details:

SR-CRACK FILL 110 is an epoxy-based polymer modified powder material for filling cracks in the plastered surface. It is composed of resigning, properly selected aggregates, polymer & additives which require the on-site addition of water only. It is ideal to fill 3 to 5 mm wider static cracks, for levelling up walls before tiling. SR Crack fill is non-shrink in nature, good water resistance properties & weathering durability. Cracks filled with SR Crack fill enhances the subsequent paintings quality and life.
Areas of Application:

• To fill the static cracks of 3 to 5 mm sizes in horizontal or vertical areas of buildings & structures.
• To level the undulation of the unplastered or plastered ceilings and walls before painting.

Features benefits:

• Non-sagging, can be used in horizontal, vertical and overhead applications.
• Good adhesion and effective bonding with the plastered substrate.
• High tensile strength, non- shrink and waterproof.
• Cost saver
• As surface leveler before painting it reduces paint consumption and increases the life of the paint making it economical.

Method of Application:

Surface Preparation:

• Remove old caulk from joints. The edges of the joints should be neat and sound.
• Make sure that surface is clean & free from puddle of water.
• The surface should be free of loose debris.
• Contaminations of oil, grease or bitumen should be completely cleaned.
• Damp wood should be allowed to dry out and decayed wood should be removed.
• Roughen smooth surfaces to give a good key.

Product Details:

ECO POLY BOND 75 tiles-groutis a cementations grout designed for use with most types of ceramic tiles and natural stone applications. The grout also contains a biocide, which provides it with a resistance to a broad spectrum of moulds and bacteria. It is a Acid proof,Anti bacterial and stable at 1800 ‘C Temperature. It is Strong adhesive force, it can effectively adhere in the gap of tiles and stones. super mold resistant and excellent waterproofing performance. It is Environmental protection product, no toxin, no taste and no pollution.

Uses:

• ECO POLY BOND 75 can be used in grout joints that are 1 – 10mm wide.
• ECO POLY BOND 75 can be used on internal or external wall and floor grouting applications.
• ECO POLY BOND 75 can also be used in swimming pools ,china mozek and wet areas.

Surface Preparation:

• Before commencing grouting, ensure the tile adhesive has set firmly. This usually requires 24 hours with the majority of tile adhesives. Remove any spacer lugs, rake-out any excess adhesive and any loose or foreign material from the grout joints. In general, ensure the grout joints are clean and dry. Allow the grout to cure for 24 hours before cleaning the grout haze with a soft dry cloth.

Mixing:

• Add ECO POLY BOND 75 to a bucket of clean water mixing constantly with until a thick creamy consistency is achieved.
• Allow the mixture to stand for 5 minutes, remix, and then use the adhesive.

Additional Information:

• Item Code: ECO-POLY-BOND-75

Product Details:

Description:SR CP GLYCOL is a water miscible High cloud point Glycol of Low toxicity and a multifunctional additive for drilling fluids. It is used in water based drilling fluids to improve lubricity and shale stability and extends the temperature stability Application:It can meet various drilling challenges, ideal for use in high angle drilling, extended rich drilling, deep and sub salt applications.
Common Name: Cloud Point Glycol(High Salinity)Advantages: It is effective and environmentally safe. It provides higher efficiency than conventional polymers and water based fluids. It reduces torque and drag. It is effective for well bore stability.

Physical properties :
1. Physical state : Liquid form at 24 ‘C2. Ph of 3% sample in KCL : 6-83. Surface tension : 40+/-54. Hydroxyl value, mg KOH/g : Positive5. Cloud point in 5% kcl sol : 80 ‘C

Product Details:

Product Details:

Product Details:

Product Details:

We are deal in Stone Breaking Chemical.