Construction Chemical

Product Details:

Anti cromozol 95 is a liquid added to concrete during the batching process. It chemically inhibits the corrosive action of chlorides on reinforcing steel and prestressed strands in concrete. DCI S has been formulated to provide set time characteristics similar to untreated concrete at 72°F (22°C).
Facts about Steel Corrosion:
Corrosion occurs in the presence of oxygen, moisture, and an electrolyte. As chlorides attack the reinforcing steel, the salt intensifies the electrolyte properties of concrete, thereby creating a corrosion cell. As the corrosion reaction occurs, rust is formed. It migrates away from the reinforcing bar, leaving more iron to be corroded. This process continues and two situations develop:
The reinforcing bars disintegrate, which reduces the flexural strength of the concrete structure andIron, as it oxidizes, expands to four times its original volume. This expansion results in physical disruption of the concrete. Typical results are cracks, stains, crazing, spelling and potholes; all of which are safety hazards.
DCI S is recommended for all steel-reinforced, post-tensioned and prestressed concrete that will come in contact with chlorides from de-icing salts or a marine environment. Examples are parking garage decks and support structures, bridge decks and prestressed members, and structures in marine environments. It may also be used in concrete where chlorides are added during manufacture.
Corrosion Inhibitor is compatible with all types of Portland cement, and concretes containing pozzolans. However, due to the significant variations between cement, even the same type, differences in cement response to DCI S may result. This is especially true with respect to the effect on setting time, which also influences slump retention.
CI is a neutral-set corrosion inhibitor formulated not to affect concrete setting times, which may also aggravate slump loss. In some cases, environmental conditions may require the addition of an accelerator or a retarder. In these cases, CI is a non-chloride accelerator, or a retarder such as It may be added separately to the concrete mix.

Additional Information:

• Item Code: Anti-Cromozol-95

Product Details:

Description:SR CP GLYCOL is a water miscible High cloud point Glycol of Low toxicity and a multifunctional additive for drilling fluids. It is used in water based drilling fluids to improve lubricity and shale stability and extends the temperature stability Application:It can meet various drilling challenges, ideal for use in high angle drilling, extended rich drilling, deep and sub salt applications.
Common Name: Cloud Point Glycol(High Salinity)Advantages: It is effective and environmentally safe. It provides higher efficiency than conventional polymers and water based fluids. It reduces torque and drag. It is effective for well bore stability.

Physical properties :
1. Physical state : Liquid form at 24 ‘C2. Ph of 3% sample in KCL : 6-83. Surface tension : 40+/-54. Hydroxyl value, mg KOH/g : Positive5. Cloud point in 5% kcl sol : 80 ‘C

Product Details:

LW Liquid is a low molecular weight solution manufacturing through spray dryer technology. It can react with cement containing active groups such as double bonds or hydroxyl group. Ligmex-80 is a new generation, 100% reactive, waterborne silane-siloxane sealer. This clear, penetrating, breathable water repellent is ideal for use on interior and exterior, above grade, traffic bearing concrete. Ligmex-80penetrates concrete surfaces and chemically bonds directly with the substrate which results in a surface that is highly resistant to the attacks of both moisture and salt. Ligmex-80 offers positive salt screening in northern, southern climates. Ligmex-80's non-flammable, non-volatile formula minimizes corrosion of reinforcing steel and protects concrete from the damaging effects of deicer chemicals, road salts, and other chemicals.

Ligmex-80's successful field and lab performance make it ideal for walkways, stairs, outside malls, building entrances, parking decks, garages, driveways, piers, bus and truck terminals, precast and priestess concrete. Other uses include architectural concrete, concrete and brick paver, and exposed aggregate surfaces.Ligmex-80 is an anion surface active polymer based liquid super plasticizer with strong dispersion effect, effective water reduction and low air-entrainment for the production of high-strength concrete with improved workability. The super plasticizer allows the preparation of highly-flow able high slump concrete with the same water/cement ratio of low slump control concrete with no additive. It improves the compressive strength of the hardened concrete.

Features and Benefits:

Formulated to stop moisture and salt penetration.

Bonding agent

Odorless/VOC compliant formulation.

Ready-to-use, non-flammable, non-volatile, waterborne formulation.

Environmentally safe.

Properties:

Allows the production of high-quality neoplastic concrete with higher fluidity retention.

Provides the same level of workability at lower water/cement ratios.

Reduces the water content by over 20% depending on the dosage amount.

Longer duration of workability retards the hardening of the concrete.

Increases the early and ultimate strength of the concrete.

Minimizes segregation and perspiration.

Improves permeability, durability, bond to steel and dimensional stability of the concrete.

Application Areas:

Ready Mix Concrete.

Stone reinforced building roof, integral and external walls, bricks, concrete block brick, colored papers, airport runways also for carrion and extending the life of ancient building. As building waterproofing agent, Ligmex-80 can be used in concrete, stone protection with good protective effect. It can form a dense substrate surface by the water layer, inhibiting the penetration of water, so as to effective prevent water seepage, the sunshine, the rain and subtract to extend the building life.

Areas where concrete freight takes a long time

Areas where high-quality concrete is desired.

Application Procedure:

ORPLAST S4 should be used after dissolving in water. After adding half of the necessary water to the cement, dissolving the admixture in the rest of the water improves the plasticizing effect.

Coverage:

Horizontal surface: 100 sq. ft/lit Vertical surface: 200 sq.ft/lit

Consumption for a specific substrate will depend on its porosity

with diluted solution

Additional Information:

• Item Code: Ligmex-80

Product Details:

SR-SBR Bond latex is a highly potent and versatile modified styrene butadiene latex based liquid for high performance applications in waterproofing and repairs. It is used for all spelled concrete-floors, columns, beams. It bonds strongly to old and new concrete and to plasters.

Applications:

For concrete repairs - Spelled concrete of floors, columns, beams, chajja, slabs, parapets, etc.

For waterproofing – Small roof terraces, sunken portions of toilets & bathrooms, chajja & lift pits, balconies

As external rendering – Weatherproof & frost resistant render

For cladding – Fixing or re-fixing of slip bricks, tiles, stones & marble bedding

As external rendering – Weatherproof & frost resistant render

As bonding slurry coat for pinhole treatment on concrete surface

Features & Benefits:

Excellent Coverage: 70-80 sq.ft per kg/ in 2 coats, hence economical

Less material wastage: material does not fall back/ rebound, when used as bonding agent

Multipurpose – It is multipurpose & economical product, easy to use

Cracking: It prevents cracking by improving flexural strength

Hardness: Improves the hardness & prevents dust generation

Shrinkage: Reduces drying & aging shrinkage cracks

Bonding: Bond strongly to concrete, masonry, stonework, plasters, cementitious surfaces

Instruction For Use:

Surface for treatments must be thoroughly cleaned of all laitance, loose material, oils, grease, etc. Mechanical means such as wire brushing, shot blasting can be used and finally vacuum cleaned of all loose solids and liquids.

Before application ensure that the surface is damp but in a touch dry condition.

Once the floor is covered, do not rinse the solution away.

Curing : 3 to 5 days with a wet hessian or jute cloth, or water spray.

Additional Information:

• Item Code: SR-SBR

Product Details:

Sitra Gel is a superior surfactant for improved cleaning system. It is formulated from our special method for scale removing and cleaning effect without, damaging surface. A super-concentrated Tiles cleaner for all types of ceramic floor tiles, slate, stone, marble and terrazzo. It cleans and then subsequently protects on drying by leaving a dirt repellent film on the surface. When dry, the colour of the tiles is enhanced and polished tiles are rejuvenated. Ideal for regular maintenance of heavily trafficked areas such as shopping malls, foyers etc.
A high quality, water-based, metal cross-linked acrylic tile cleaner for internal use on floors. Tiles polish enriches the appearance of floor finishes by leaving a hard wearing, matt, satin finish, protecting tiles from the formation of stubborn dirt and stain and has good resistance to normal detergents, typical household spillages and general floor cleaners Fast acting, concentrated wall and floor tile cleaners with the antibacterial performance for tiled surfaces. The special formulation removes dirt, grease and stains from tiled surfaces. When dry, the surface is left hygienically clean. Suitable for all types of ceramic tiles, slate, stone, marble and terrazzo. A powerful, heavy duty, cleaner for ceramic tiled floors and walls. The cleaner can be easily applied to both horizontal and vertical surface, where it remains in contact with the area to be cleaned. Heavy Duty Tile Cleaner is designed for removal of residues, efflorescence and lime scale. It may also be used as a general purpose cleaner on another acid resistant surface.

Instruction For Use:

• Dilute a cupful of Floor Clean Tile into a bucket of warm water.
• With a cloth or mop, clean the floor thoroughly using the diluted solution and regularly rinsing the mop or cloth in a separate bucket of clean water to avoid contaminating the cleaning solution. For difficult to clean floors as scrubbing machine may be used
• Once the floor is covered, do not rinse the solution away.
• Allow the floor to dry naturally, leaving a protective film. This film will be removed and replaced at subsequent washes.

Product Details:

SR-Hardener Cement Accelerator is a polymeric hardener for cement mixes such as concrete, mortars and other sand/cement mixes. It is a clear liquid which will not alter the color of the material to which it is added. SR-Hardener Cement Accelerator is perfect for use in cooler climates or during winter. It is also suitable when installations need to be finished quickly.

Uses/Advantages

SR-Hardener Cement Accelerator can be used to accelerate the setting time of concrete, mortar and other sand/cement mixes.

Suitable for use when concreting in cold weather climates.

Cement Accelerator promotes high early strength and allows earlier finishing and removal of formwork and moulds.

By using SR-Hardener Cement Accelerator you can achieve 7 day compressive strengths in 48 hours.

Precautions:

Always pre-dilute SR-Hardener Cement Accelerator. Do not add SR-Hardener Cement Accelerator directly to the dry concrete or sand/cement mix.

Avoid contact with skin when working with cementations mixes. Protect by wearing rubber gloves etc.

For addition to cement based tile adhesives, add 125ml SR-Hardener Cement Accelerator mixed into the amount of clean water (as specified by the manufacturer) with each 20 kg bag of adhesive.

SR-Hardener Cement Accelerator will reduce the amount of working time that the concrete or sand/cement mix normally provides. Always take this into account by mixing smaller batches and carrying out work in smaller stages.

Environmental & Safety Precautions:

Care should be taken when handling, that applicators wear PVC or similar gloves and safety goggles.

For a full MSDS on this product, contact the SR Technical Advisory Line Cement Accelerator is a polymeric hardener for cement mixes such as concrete, mortars and other sand/cement mixes. It is a clear liquid which will not alter the colour of the material to which it is added. SR-Hardener Cement Accelerator is perfect for use in cooler climates or during winter. It is also suitable when installations need to be finished quickly.

Uses/Advantages

SR-Hardener Cement Accelerator can be used to accelerate the setting time of concrete, mortar and other sand/cement mixes.

Suitable for use when concreting in cold weather climates.

Cement Accelerator promotes high early strength and allows earlier finishing and removal of formwork and moulds.

By using SR-Hardener Cement Accelerator you can achieve 7-day compressive strengths in 48 hours.

Precautions:

Always pre-dilute SR-Hardener Cement Accelerator. Do not add SR-Hardener Cement Accelerator directly to the dry concrete or sand/cement mix.

Avoid contact with skin when working with cementations mixes. Protect by wearing rubber gloves etc.

For addition to cement based tile adhesives, add 125ml SR-Hardener Cement Accelerator mixed into the amount of clean water (as specified by the manufacturer) with each 20 kg bag of adhesive.

SR-Hardener Cement Accelerator will reduce the amount of working time that the concrete or sand/cement mix normally provides. Always take this into account by mixing smaller batches and carrying out work in smaller stages.

Environmental & Safety Precautions:

Care should be taken when handling, that applicators wear PVC or similar gloves and safety goggles.

For a full MSDS on this product, contact the SR Technical Advisory Line

Additional Information:

• Item Code: SR-Hardener

Product Details:

SR-ACRO is a heavy duty terrace waterproof coating system, composed of specially developed highly elastic & resilient acrylic polymers, properly selected & graded fillers, lightfast & weather durable pigments, micro-fibres, additives & best quality fungicidal in water medium. It is used as a liquid applied waterproofing membrane for all types of building terraces. It is a three-layer system with coats in different colours ensuring proper build-up of the thickness, making it a reliable waterproofing system. The coating performance can be enhanced for large roofs, by providing a fibre mesh that is embedded or sandwiched between the coats.